H155 PE (Belden) - 50 Ohm Coaxial Cable

H155 PE 

Belden H155 PE with UV-resistant * black outer sheath is a flexible super low loss coaxial cable with low attenuation

loss at 2.4 GHz: 0,48dB / m
Impedance: 50 ohms
Inner conductor: 19 x 0.28 mm
Dielectric: Gas inj. PE 3,9mm Au ROAD
Outer conductor 1: 0.008 to 0.03 x 18mm aluminum foil
Outer conductor 2: copper braid, 16 x 8 x 0.1 mm
External insulation: PE Outside
Diameter: 5.4mm

Available as 100 m Ring in dispenser box and the cut from 1 m-
 

Find out more about PE / Polyethylene:

Polyethylene has a very low water vapor permeability. The diffusion of gases, flavors and essential oils, however, is relatively high. Polyethylene has good toughness, low strength and hardness, excellent chemical resistance, but a tendency to crack in tension and low temperature resistance and can not be used and is up to 30 ° C cold resistant at temperatures above 80 ° C. Its low density ranging from 0.915 to 0,965g / cm³ ;. Polyethylene is soluble only in solvents above 60 ° C. Certain hydrocarbons cause swelling. Depending on the thickness of polyethylene is milky white opaque to transparent. Products with higher molecular weight have better strength and stretchability. They are recognized by the designation high molecular weight (HMW-LDPE). By copolymerization of ethylene with butene and octene beispeislweise the degree of branching of the polyethylenes produced can be reduced. These copolymers are referred to as linear low density polyethylene (LLDP), respectively. The advantages of polyethylene lie V. A. in the smell and Geschmacksneutralit BEAR t, high transparency, ease of processing, excellent welding properties, long service life, high load capacity and the food authenticity and Recyclbarkeit. Source: Environmental encyclopedia online - 21/04/2012
 

Technical data H155 as PDF for download

H155 PVC, H155 PE, H155 FRNC or H155 LSNH